Canon LBP251 - Notice

◼ Displaying the [Software Programs/Manuals Setup] Screen
If your computer does not display the [Software Programs/Manuals Setup] screen after inserting the DVD-ROM, follow
the procedure below. The DVD-ROM drive name is indicated as "D:" in this manual. The DVD-ROM drive name may
differ depending on the computer you are using.
Windows Vista/7/Server 2008
[Start] enter "D:\MInst.exe" in [Search programs and les] or [Start Search] press the [ENTER] key.
Windows 8/Server 2012
Right-click the lower-left corner of the screen [Run] Enter "D:\MInst.exe" click [OK]
Windows 8.1/Server 2012 R2
Right-click [Start] [Run] Enter "D:\MInst.exe" click [OK]
Windows Server 2003
[Start] [Run] enter "D:\MInst.exe" click [OK]
◼ Printing a Test Page in Windows
You can check whether the printer driver is operational by printing a test page in Windows.
1
Load A4 size paper in the multi-purpose tray. Loading Paper in the Multi-Purpose
Tray(P. 41)
2
Open the printer folder. Displaying the Printer Folder(P. 474)
3
Right-click your printer icon and click [Printer properties] or [Properties].
4
Click [Print Test Page] in [General] tab.
Appendix
476