To store the adjusted data, selectand
then press the Point ► or the OK button. Move
the highlight to one of the Modes 1 to 10 in
which you want to store, and then press the OK
button.
To clear the stored data, select and
then press the Point ► or the OK button. Move
the highlight to the Mode that you want to clear
and then press the OK button.
Reset
To reset the adjusted data, select Reset and
press the OK button. A confirmation box appears
and then select . All adjustments will return
to their previous figures.
This Mode has stored
parameters.
Values of ,
, ,
area H, and .
Vacant
Press OK button
to store the data.
Press MENU
button to close
this dialog box.
To Next Page
Loading...
Need help?
General
