Need help?Do you have a question about the Canon LV-7265 and is the answer not in the manual?
Describes the various connectors and ports on the projector's terminal panel.
Step-by-step process to power on the projector and prepare for projection.
How to choose input sources and set a default source for automatic display.
How to adjust the projected image size, position, and use the tilt feet for leveling.
Methods for correcting image distortion using cabinet buttons or the remote control.
Using the Auto PC button for image optimization and adjusting speaker volume.
Step-by-step instructions for properly powering down the projector.
Explanations for image mode, reference, gamma, and color temperature settings.
Explanations for aspect ratio, cinema position, and horizontal/vertical adjustments.
Explanations for auto keystone, keystone save, screen color, lamp mode, and beep settings.
Settings for password, menu display, timers, auto adjust, power, and fan speed.
Displays lamp/filter usage, counters, and current input signal status.
How to reset current signal settings, all data, lamp counter, and filter counter.
How to clean the air filter or replace it with a new one.
Detailed steps, precautions, and tools required for replacing the projector lamp.
Helps resolve common problems by identifying issues and providing solutions based on indicators.
A checklist to help efficiently diagnose and resolve projector problems before seeking service.
Describes the various connectors and ports on the projector's terminal panel.
Step-by-step process to power on the projector and prepare for projection.
How to choose input sources and set a default source for automatic display.
How to adjust the projected image size, position, and use the tilt feet for leveling.
Methods for correcting image distortion using cabinet buttons or the remote control.
Using the Auto PC button for image optimization and adjusting speaker volume.
Step-by-step instructions for properly powering down the projector.
Explanations for image mode, reference, gamma, and color temperature settings.
Explanations for aspect ratio, cinema position, and horizontal/vertical adjustments.
Explanations for auto keystone, keystone save, screen color, lamp mode, and beep settings.
Settings for password, menu display, timers, auto adjust, power, and fan speed.
Displays lamp/filter usage, counters, and current input signal status.
How to reset current signal settings, all data, lamp counter, and filter counter.
How to clean the air filter or replace it with a new one.
Detailed steps, precautions, and tools required for replacing the projector lamp.
Helps resolve common problems by identifying issues and providing solutions based on indicators.
A checklist to help efficiently diagnose and resolve projector problems before seeking service.
General| Resolution | XGA (1024 x 768) |
|---|---|
| Brightness | 3000 ANSI lumens |
| Lamp Life | 3000 hours (Normal Mode) |
| Technology | LCD |
| Projection Size | 30" to 300" |
| Input Ports | HDMI, VGA, Composite Video, S-Video |
| Output Ports | VGA, Audio |
| Noise Level | 30 dB (Eco Mode) |
To Next Page
