12
⑦
Lights yellow when the projection lamp
reaches its end of life (pp.68, 75).
⑧
– Lights red when the projector detects an
abnormal condition.
– Blinks red when the internal temperature of
the projector exceeds the operating range
(pp.65, 75).
④
Turn the projector on or off (pp.21-23).
⑤
– Lights red when the projector is in stand-by
mode.
– Lights green during operations.
– Blinks green in the Power management
mode (p.56).
⑥
Open or close the On-Screen Menu (p.24).
② ▲▼◄►
– Select an item or adjust the value in the On-
Screen Menu (p.24).
– Pan the image in the Digital zoom +/- mode
(pp.38, 40).
– Adjust the volume level (Point ◄►buttons)
(p.27).
③
Execute the setting of Auto setup (includes
Auto input, Auto PC and Auto Keystone
functions) in the setting menu (pp.26, 52).
①
– Execute the selected item (p.24).
–Zoom in or out the image in the Digital zoom
mode (pp.38, 40).
OK
PO WER
AUTO SET
MENU
LAMP REPLACE
WARNING
VOLVOL
①
②
③
④
⑤
⑧
⑥
⑦
To Next Page
Loading...
Need help?
General
