An interlaced video signal can be displayed in
progressive mode. Select one of the following
options.
........ Disabled.
L 1 ........ For an active picture.
L 2 ........ For a still picture.
..... For watching a lm. With this function,
the projector reproduces pictures
faithful to the original film quality.
Noise interference on the screen can be
reduced. Select one of the following options to
get smoother images.
........ Disabled.
L 1 ........ Lower reduction
L 2 ........ Higher reduction
and can not be
selected when the input signal is , ,
, 1035i or 1080i (p.40).
To reset the adjusted data, select Reset
and press the OK button. A confirmation box
appears and then select . All adjustments
will return to their previous figures.
Reset
To store the adjusted data, select and
press the Point ► button or the OK button.
Use the Point ▲▼ buttons to select one from
User 1 to User 4 and press the OK button.
A confirmation box appears and then select
. Stored data can be called up by selecting
an in the Image Mode Selection on
page 41.
A confirmation box
appears and then
select .
To Next Page
Loading...
Need help?
General
