(5) User mode
MP970 TABLE OF CONTENTS
Function Procedures Remarks
Nozzle check pattern printing Perform via the machine operation panel, or from
the MP driver Maintenance tab.
Set a sheet of plain paper (A4 or Letter) in
the rear tray or the cassette which is
selected on the Paper Feed Switch button.
Print head manual cleaning - Cleaning both Black and Color:
Perform via the machine operation panel.
- Cleaning Black or Color separately, or both Black
and Color:
Perform from the MP driver Maintenance tab.
Unclogging of the print head nozzles, and
maintenance to keep the print head
conditions good.
If there is a missing portion or white
streaks in the nozzle check pattern
printout, perform this cleaning.
Print head deep cleaning Perform via the machine operation panel, or from
the MP driver Maintenance tab.
If print head manual cleaning is not
effective, perform this cleaning. Since the
deep cleaning consumes more ink than
regular cleaning, it is recommended to
perform deep cleaning only when
necessary.
Automatic print head
alignment
Perform via the machine operation panel, or from
the MP driver Maintenance tab.
If automatic alignment is not effective,
perform manual print head alignment.
(1 sheet of A4 plain paper)
Manual print head alignment Perform via the machine operation panel, or from
the MP driver Maintenance tab.
Set 4 sheets of plain paper (A4 or Letter)
in the rear tray or the cassette which is
selected on the Paper Feed Switch button.
(3 sheets of A4 plain paper)
Print head alignment value
printing
Perform via the machine operation panel, or from
the MP driver Maintenance tab.
Confirmation of the current print head
alignment values.
Paper feed roller cleaning Perform via the machine operation panel, or from
the MP driver Maintenance tab.
The paper feed rollers rotate while being
pushed to the paper lifting plate. Since the
rollers will wear in this cleaning, it is
recommended to perform this only when
necessary.
Bottom plate cleaning Perform via the machine operation panel, or from
the MP driver Maintenance tab.
Cleaning of the platen ribs when the back
side of paper gets smeared.
Fold a sheet of plain paper (A4 or Letter)
in half crosswise, then unfold and set it in
the rear tray with the folded ridge facing
down.
LAN resetting Initialize the LAN setting. (Return the LAN setting
to its original state.)
Perform via the machine operation panel
(settings-each setting), or from the
computer (IJ Network Tool).
LAN setting information
display
Confirm the LAN setting. Perform via the machine operation panel
(settings-each setting), or from the
computer (IJ Network Tool).
To Next Page
Loading...
