Canon PIXMA MP970 SERIES User Manual (English)

Other manuals for Canon PIXMA MP970 SERIES

Network Setup Guide32 pages

Setup Instructions2 pages

Questions and Answers:

K
Kenneth LynchAug 18, 2025
Why does an error message appear on the LCD of my Canon PIXMA MP970 Printer?
- T
  Teresa MorseAug 18, 2025
  If an error message appears on the LCD of your Canon Printer, it could be due to several reasons. The message might appear because there's no readable image data on the memory card; in this case, ensure your file names and folder paths use only alphanumeric characters. Alternatively, the ink may have run out, requiring you to replace the ink tank, or the print head may not be installed correctly, so reinstall it following the setup sheet instructions. Also, check if the inner cover is open during printing and close it, or if the ink tanks are not in the correct positions, adjust them accordingly.
E
Eric Mcintosh Jr.Aug 21, 2025
Why is my Canon PIXMA MP970 Printer printing does not start?
- S
  Shelby ChenAug 21, 2025
  If your Canon Printer isn't starting, it could be due to an empty ink tank. Refer to the error messages displayed on the LCD to identify the specific ink error, and then take the necessary steps to resolve it. Another possibility is that the ink tank isn't installed correctly. In this case, open the Scanning Unit (Printer Cover) and check the ink lamps to ensure proper installation.
S
Shaun HarrisAug 23, 2025
Why Canon PIXMA MP970 paper does not feed properly?
- M
  Megan RobinsonAug 23, 2025
  If your Canon Printer's paper isn't feeding properly, it might be due to several reasons. First, make sure you're using the appropriate type of paper, avoiding paper that's too thick or curled. Secondly, a dirty Paper Feed Roller can cause issues, so try cleaning it. Finally, ensure that the paper is loaded correctly in the machine.
M
Melinda SnyderAug 26, 2025
What to do if Canon PIXMA MP970 Printer the ink absorber is almost full?
- B
  Brooke LittleAug 26, 2025
  If your Canon Printer indicates that the ink absorber is almost full, press OK to continue printing. However, it's recommended to contact a Canon service representative because printing will be disabled once the ink absorber is completely full until it is replaced.
A
Alexa DeanAug 28, 2025
What to do if auto head align has failed on Canon PIXMA MP970?
- K
  kellie93Aug 28, 2025
  If your Canon Printer's auto head alignment has failed, it could be due to a few reasons. The Print Head nozzles might be clogged; press the OK button to dismiss the error and print a nozzle check pattern to assess the Print Head's condition. Another reason could be that you're using paper that isn't A4 or Letter size in the Rear Tray; load A4/Letter-sized plain paper instead. Lastly, strong light exposure to the Paper Output Slot can cause this issue; adjust the printer's position or your environment to reduce the light.
J
Jeffrey CrossAug 30, 2025
How to fix Canon PIXMA MP970 when the remaining level of the following ink cannot be correctly detected?
- M
  mclaughlinnicoleAug 30, 2025
  If the remaining ink level cannot be correctly detected on your Canon Printer, replace the ink tank and close the Scanning Unit (Printer Cover). If you wish to continue printing without replacing the ink tank, you will need to release the function for detecting the remaining ink level.
C
Cody HernandezSep 2, 2025
What to do if Canon PIXMA MP970 Printer the following ink tank cannot be recognized?
- K
  Kaitlin MeyersSep 2, 2025
  If your Canon Printer displays a message indicating that the following ink tank cannot be recognized, there are a few potential reasons. First, ensure that the ink tank is properly installed. If it is, check whether the ink tank is compatible with your machine and install an appropriate one if necessary. Finally, if an ink tank error has occurred, replacing the ink tank should resolve the issue.
C
Chad MooneySep 4, 2025
Why Canon Printer machine moves but ink is not ejected?
- T
  Tony TurnerSep 5, 2025
  If your Canon Printer is moving but not ejecting ink, it's likely that the Print Head nozzles are clogged. Refer to the section “When Printing Becomes Faint or Colors Are Incorrect” in your manual and perform the necessary maintenance operations.
S
Shawn HarveySep 7, 2025
Why error message appears on a PictBridge compliant device connected to Canon PIXMA MP970?
- S
  sthomasSep 7, 2025
  If you see an error message on a PictBridge compliant device connected to your Canon Printer, it's likely because the printer is currently printing from the computer or is in the process of warming up. Wait until the current job finishes before attempting to print from the PictBridge device.
B
Belinda MayerSep 9, 2025
What does it mean when my Canon Printer says to release the scanner lock switch?
- C
  Christian MooreSep 9, 2025
  If your Canon Printer displays a message to release the scanner lock switch and turn the power off and back on, it means the Scanner Lock Switch is not released. Slide the Scanner Lock Switch to the release position and press the ON/OFF button to turn the machine off.

Canon PIXMA MP970 SERIES Specifications

General

Print Technology	Inkjet
Maximum Print Resolution	9600 x 2400 dpi
Scanner Type	Flatbed
Scanner Optical Resolution	4800 x 9600 dpi
Card Reader	Yes
Functions	Print, Scan, Copy
Ink Cartridge Type	Individual Ink Cartridges
Input Capacity	150 sheets
Connectivity	USB, Ethernet
Operating System Support	Windows, Mac
Paper Sizes	Letter, Legal, Envelopes
Ink Cartridges	6 (Black, Cyan, Magenta, Yellow, Photo Cyan, Photo Magenta)
Dimensions	468 x 388 x 223 mm
Weight	12.8 kg