Need help?Do you have a question about the Canon PIXMA MP630 and is the answer not in the manual?
General| DVD/CD printing | Yes |
|---|---|
| Print technology | Inkjet |
| Maximum resolution | 9600 x 2400 DPI |
| Print speed (black, normal quality, A4/US Letter) | 25 ppm |
| Print speed (color, normal quality, A4/US Letter) | 21 ppm |
| Scanner type | Flatbed scanner |
| Input color depth | 48 bit |
| Maximum scan resolution | 19200 x 19200 DPI |
| Copy speed (black, normal quality, A4) | 24 cpm |
| Copy speed (color, normal quality, A4) | 19 cpm |
| Maximum input capacity | 150 sheets |
| Display | TFT |
| Display diagonal | 2.4 \ |
| Market positioning | Home & office |
| Dimensions (WxDxH) | 450 x 368 x 176 mm |
| Power requirements | AC 100-240V, 50/60Hz |
| All-in-one functions | Copy, Scan |
| Color all-in-one functions | copy, print |
| Compatible operating systems | TWAIN/WIA (Windows XP/Windows Vista) |
| Sound pressure level (printing) | 46.5 dB |
| Media weight (tray 1) | 105 |
| Paper tray media types | Envelopes, Glossy paper, Labels, Photo paper, Plain paper |
| Non-ISO print media sizes | Legal |
| Bundled software | Canon MP Navigator EX/Canon Easy-PhotoPrint EX/CD-Label Print |
| Power consumption (off) | 0.5 W |
| Power consumption (standby) | 2.1 W |
| Power consumption (average operating) | 16 W |
| Operating temperature (T-T) | 5 - 35 °C |
| Non-operating relative humidity (non-condensing) | 10 - 90 % |
| Ethernet LAN | No |
Instructions that, if ignored, could result in personal injury or material damage.
Instructions that must be observed for safe operation.
Remove orange tapes and protective sheets before turning on the machine.
Plug in the power cord on the left side and connect to the wall outlet.
Open the Operation Panel, then press the ON button to turn on the machine.
Do NOT connect the USB cable at this stage; ensure Document Cover is closed.
Open Paper Output Tray, lift Scanning Unit until it locks; Print Head Holder emerges.
Do not handle the Print Head roughly or apply excessive pressure or drop it.
Firmly raise the Print Head Lock Lever until it stops.
Pull orange tape and remove protective film from the ink tank.
Press ink tank and twist off the orange protective cap.
Do not hold ink tank sides; ink may splash.
Open the Paper Support and pull it out.
Move the Paper Guides to both edges.
Load supplied speciality paper (MP-101) in the Rear Tray.
Software installation copies drivers and applications to the computer's hard disk.
Quit applications, log on as administrator, do not switch users during installation.
Handle 'Found New Hardware' wizard by locating drivers or cancelling.
Remove USB cable, click Cancel on wizard, then proceed to CD-ROM setup.
Press the ON button (A) to turn OFF the machine.
Turn on computer, insert Setup CD-ROM. Setup should run automatically.
AutoPlay screen appears, click Run Msetup4.exe.
User Account Control screen appears, click Continue.
Click Easy Install for automatic installation of drivers and manuals.
Click Install to begin installing selected software programs.
Read the License Agreement carefully and click Yes to proceed.
Connect USB cable, turn on the machine when the Printer Connection screen appears.
Load plain paper into the Cassette and click Next.
Click Next on the Setup Complete screen.
Click Exit. Restart if prompted. Remove CD-ROM after restart.
To Next Page
