<Destination settings>
In the destination settings mode, press the Stop/Reset button the specified number of time(s) according to the destination listed in
the table below, and press the ON/OFF button.
5 times Orange (Alarm) Destination settings Press the Stop/Reset button the specified number of time
(s) according to the destination.
See "Destination settings" below.
6 times Blue (Power) Print head deep cleaning Cleaning of both Black and Color
7 times Orange (Alarm) CD / DVD check pattern
print
Not used in servicing.
8 times Blue (Power) CD / DVD print position
correction (horizontal: X
direction)
Not used in servicing.
9 times Orange (Alarm) CD / DVD print position
correction (vertical: Y
direction)
Not used in servicing.
10 times Blue (Power) LF / Eject correction See "LF / Eject correction" below.
11 times Orange (Alarm) Left margin correction Not used in servicing.
12 times Blue (Power) Button and LCD test See "Button and LCD test" below.
13 times Orange (Alarm) Ink absorber counter setting See "Ink absorber counter setting" below.
14 times Blue (Power) Return to the menu selection
15 times Orange (Alarm) Return to the menu selection
16 times or
more
Blue (Power) Return to the menu selection
If the Stop/Reset button is pressed 14 or more times, the Alarm LED (orange) or Power LED (blue) lights
steadily without any changes.
Time(s) LED indication Destination CD / DVD print
0 times Blue (Power) No change of the destination ---
1 time Orange (Alarm) Japan Supported
2 times Blue (Power) Korea No sales of the MP970
3 times Orange (Alarm) US Not supported
4 times Blue (Power) Europe Supported
5 times Orange (Alarm) Australia Supported
6 times Blue (Power) Asia Supported
7 times Orange (Alarm) China No sales of the MP970
8 times Blue (Power) Taiwan No sales of the MP970
9 times Orange (Alarm) Latin America No sales of the MP970
10 times Blue (Power) Brazil No sales of the MP970
11 times Orange (Alarm) Canada Not supported
12 times or more Blue (Power) Return to the destination selection ---
After setting the destination, confirm the model name and destination in service test print or EEPROM
information print.
To Next Page
Loading...
