83
Editing
E
Recording from Analog Video
Devices (VCR, TV or Camcorder)
You can record videos or TV programs from a VCR or analog camcorder on the tape in
the camcorder.
1. Connect the camcorder to the analog video device.
See Playing Back on a TV Screen ( 33).
2. Set the camcorder to PLAY (VCR) mode and load a blank cassette.
3. Connected device: Load the recorded cassette.
4. Press the REC PAUSE button.
In record pause mode and during recording, you can check the
picture on the screen.
5. Connected device: Play back the tape.
6. Press the e/a button when the scene you wish to
record appears.
Recording starts.
7. Press the 3 button to stop recording.
•Press the e/ a button to pause recording.
•Press the e/ a button again to restart recording.
8. Connected device: Stop playback.
❍ Headphones cannot be used during analog line-in recording.
❍ When connecting to a TV/video with SCART terminal, use a SCART adapter
with input capability (commercially available). The supplied SCART Adapter
PC-A10 is for output only.
To Next Page
Loading...
Need help?
General
