Need help?Do you have a question about the Canon Oce TDS Series and is the answer not in the manual?
General| Toner | Dry Toner |
|---|---|
| Resolution | 600 x 600 dpi |
| Print Resolution | 600 x 600 dpi |
| Dimensions | Varies by model |
| Weight | Varies by model |
| Maximum Print Width | 36 inches |
| Media Types | vellum, film |
| Connectivity | Ethernet |
| Operating Systems | Windows |
Details the version history and updates of the Océ Connectivity Manual.
Provides an overview of the manual's scope and target environments.
Lists the transport and printing protocols supported by Océ Wide Format Printing Systems.
Presents compatibility matrices for printer drivers and controller applications.
Describes the available network boards and physical connection options.
Explains network printing architectures like Client/Server and Peer to Peer.
Details the setup for peer-to-peer network printing configurations.
Guides on configuring TCP/IP settings for print system controllers, including DHCP and manual IP.
Procedures for enabling various print protocols like LPD/LPR, FTP, and SMB.
Details on configuring remote applications for printer management.
Provides instructions for installing and upgrading remote controller applications.
Information on IPv6 implementation, compatibility, and settings for Océ systems.
Setup procedures for an Océ Print Server in a client/server network configuration.
Explains the function of print ports and recommendations for configuration.
Steps to prepare the print server before installing printer drivers.
Instructions for installing printer drivers on a print server.
Important notes regarding naming conventions for printers during installation.
Detailed steps for installing Océ WPD and WPD2 drivers on a print server.
Procedure for installing the Océ PostScript 3 printer driver on a print server.
Describes client workstation setup to use Océ printers over TCP/IP.
Steps to install a printer driver on a client workstation.
Instructions for printing from AutoCAD applications using Océ printers.
Details the setup for peer-to-peer network printing configurations.
Instructions for installing printer drivers on a client workstation.
Detailed steps for installing Océ WPD and WPD2 drivers on a client workstation.
Procedure for installing the Océ PostScript 3 printer driver on a client workstation.
Instructions for sending print jobs using a DOS command line interface via FTP.
Steps to submit print jobs using a web browser via FTP.
Lists the requirements for installing WPD2 drivers in a failover cluster environment.
Procedure to install the WPD2 printer driver on each node of a failover cluster.
Steps to install drivers and printers on the print server cluster.
Instructions for installing the printer on a client workstation from the cluster.
Provides an overview of retrieving information via the SNMP protocol.
Details SNMP specifications, supported OIDs, and compatibility.
Explains the SNMP parameters and their settings on Océ controllers.
Examples of information retrievable via SNMP from Océ TDS450 systems.
Troubleshooting common connection issues with remote controller applications.
Resolves connection issues where the message field shows 'System Initialising...'.
Troubleshoots connection problems indicated by 'Trying to connect...' messages.
Solves issues where IP addresses or hostnames disappear in Océ Remote Logic.
Addresses Océ Power Logic Remote freezing when switching between systems.
Instructions to switch the Océ Settings Editor to System Administrator mode.
Procedure for rebooting the printer controller to activate settings.
Information on obtaining support and downloading resources from Océ.
A form for users to provide feedback on the manual.
To Next Page