Using
the
DM·50
Microphone
(Optional}
The high sensitive Directional Stereo Microphone
DM-50
attaches
to
the,,$"
advanced
accessory
shoe for cable-free operation and
is
powered
by
the
camcorder's
power
supply.
Use
it
for
recording or dubbing audio.
Refer
also
to
the
DM-50
Microphone instruction .manual.
a Always turn the camcorder
off
before attaching/removing the microphone.
a
Do
not
connect any microphone
to
the MIC terminal when the OM-50
Microphone
is
connected.
a
Do
not
carry the camcorder
by
the microphone.
1. Remove
the
accessory shoe cover.
2. Slide
the
microphone into
the
accessory shoe until
it
clicks.
3. Tighten
the
shoe lock.
Make
sure
that the microphone
is
securely
attached
to
the camcorder.
4. Set
the
camcorder
to
CAMERA
or
CARD CAMERA mode.
II
[!J
II
(Connection) appears.
5.
Set
the
microphone's directivity
switch.
•
SHOTGUN:
For
recording clear sound from
the front (monaural).
•
STEREO
1:
For
recording sound from the
front and surrounding
area.
•
STEREO
2:
For
recording surrounding
sound
in
a wider range than
in
STEREO
1.
-
o C
-hU'l
"T1
:i.
m{,Q
r+ r+
r::
::r
~
to
U'l
"T1
§:
::tI
OJ
:::s
{,Q
to
81
To Next Page
Loading...
Need help?
General
