Canon PIXMA G7020 User Manual

What Is ScanGear (Scanner Driver)?
ScanGear (scanner driver) is software required for scanning documents. Use the software to specify the
output size, image corrections, and other settings.
ScanGear can be started from IJ Scan Utility or applications that are compatible with the standard TWAIN
interface. (ScanGear is a TWAIN-compatible driver.)
Features
Specify the document type, output size, and other settings when scanning documents and preview scan
results. Make various correction settings or finely adjust the brightness, contrast, and other parameters to
scan in a specific color tone.
Screens
There are two modes: Basic Mode and Advanced Mode.
Switch modes with the tabs on the upper right of the screen.
Note
• ScanGear starts in the last used mode.
• Settings are not retained when you switch modes.
Basic Mode
Use the Basic Mode tab to scan easily by following three simple on-screen steps (
, , and
).
336

Canon PIXMA G7020 Specifications

General

Print Technology	Inkjet
Print Resolution	4800 x 1200 dpi
Duplex Printing	Auto
Supported Operating Systems	Windows, macOS
Scanner Resolution	1200 x 2400 dpi
Ink Tank System	Yes
Ink Colors	Black, Cyan, Magenta, Yellow
Ink Type	Pigment Black, Dye-based Color (Cyan, Magenta, Yellow)
Connectivity	USB, Wi-Fi, Ethernet
Paper Handling	Rear Paper Tray, Cassette
Display	2-line Full-Dot Matrix LCD
Functions	Print, Scan, Copy, Fax
Print Speed (Black)	Approx. 13.0 ipm
Print Speed (Color)	Approx. 6.8 ipm
Paper Sizes	Letter, Legal, 4 x 6", 5 x 7", 8 x 10"
Paper Capacity	350 sheets
Mobile Printing	Canon PRINT app, AirPrint
Scanner Type	Flatbed and ADF