Canon PIXMA iP4500 Series User Manual (English)

Other manuals for Canon PIXMA iP4500 Series

Questions and Answers:

M
Manuel HayesAug 18, 2025
What to do if my Canon PIXMA iP4500 Printer does not start?
- E
  Emily GlassAug 18, 2025
  If your Canon printer doesn't start, consider these potential causes: * Ensure the power cord is securely plugged into the printer's Power Cord Connector. * Check if ink tanks are empty by opening the Top Cover and observing the ink lamps. * Make sure ink tanks are installed in the correct positions; if an ink lamp flashes red, it may be misplaced. * Confirm ink tanks are securely installed by pressing the mark on each tank until it clicks into place if the ink lamp is not lit. * Restarting your computer may also solve the problem.
T
Tony RomanAug 20, 2025
What to do if my Canon PIXMA iP4500 is printing blurred or with wrong colors?
- J
  Jennifer PerryAug 20, 2025
  If your Canon printer is printing blurred images or incorrect colors, consider the following: * If the ink tank is empty, open the Top Cover of the printer to check the ink lamps and take appropriate action. * Make sure all protective film is removed from the ink tank, exposing the air hole. * If Print Head nozzles are clogged, print the nozzle check pattern to check for uneven ink output. * Ensure the media is loaded with the correct side facing upwards, referring to the paper's instruction manual. * If the Print Head is misaligned, perform Print Head Alignment.
L
Lisa MitchellAug 23, 2025
Why does my Canon PIXMA iP4500 not feed paper properly?
- R
  Rachel Shepherd MDAug 23, 2025
  If your Canon printer isn't feeding paper properly, check the following: * Ensure the paper you're using isn't too thick or curled. * Clean the Paper Feed Roller only when necessary, as cleaning will wear the roller. * Make sure the paper is loaded correctly in the printer. * Ensure the paper stack doesn't exceed the load limit.
M
michellechandlerAug 28, 2025
How to fix Canon PIXMA iP4500 paper jams?
- K
  Kristen WatsonAug 28, 2025
  To resolve paper jams in your Canon printer, consider these points: * Remove any jammed paper from the Paper Output Slot, the Rear Tray, or the Cassette. * Do not load credit card-sized paper in landscape orientation. * Always load 4" x 6" / 101.6 x 152.4 mm media in portrait orientation, regardless of the printing orientation. * Remove any jammed paper inside the printer at the transport unit or the duplex transport section.
R
Roy RichardsonSep 2, 2025
What causes scratches or smudges on printed surfaces from my Canon Printer?
- K
  Keith HoSep 2, 2025
  Scratches or smudges on printed surfaces from your Canon printer can be caused by several factors: * A dirty Paper Feed Roller. Clean the Paper Feed Roller only when necessary, as cleaning will wear the roller. * A dirty inside of the printer. This can occur during duplex printing if the specified paper size doesn't match the paper loaded, causing ink stains inside the printer. * Printing on an inappropriate type of paper that is too thick or curled. * Printing on thick paper. Selecting the Prevent paper abrasion setting will widen the clearance between the Print Head and the loaded paper.
T
Tina MartinSep 4, 2025
What to do if my Canon PIXMA iP4500 Printer prints paper that curls or has ink blots?
- T
  Thomas BrewerSep 4, 2025
  If your Canon printer is printing paper that curls or has ink blots, it might be because the paper is too thin. When printing data with high color saturation, such as photos or images in deep color, using Photo Paper Pro or other Canon specialty paper is recommended.
W
wattscaitlynSep 7, 2025
Why is my Canon PIXMA iP4500 not ejecting ink even though it moves?
- N
  naustinSep 7, 2025
  If your Canon printer moves but doesn't eject ink, it could be due to: * Clogged Print Head nozzles. Print the nozzle check pattern to check for uneven ink output. * An empty ink tank. Open the Top Cover of the printer to check the ink lamps. * The protective film remaining on the ink tank. Ensure all protective film is peeled off, exposing the air hole.
C
Charles RhodesSep 9, 2025
Why does an error message appear on a PictBridge compliant device connected to my Canon PIXMA iP4500 Printer?
- L
  lewisraymondSep 9, 2025
  If you're seeing an error message on a PictBridge compliant device connected to your Canon printer, here's what it could mean: * “No paper”: Load paper in the Rear Tray and select Continue on your PictBridge device. * “Paper Error”: Open the Paper Output Tray if it's closed. * “Printer cover open”: Close the Top Cover on the printer. * “No print head”: The Print Head is defective or not installed.

Canon PIXMA iP4500 Series Specifications

General

Print Technology	Inkjet
Max Resolution	9600 x 2400 dpi
Connectivity	USB 2.0
Number of Ink Cartridges	5
Ink Compatibility	CLI-8, PGI-5
Borderless Printing	Yes
Print Speed (Color)	24 ppm
Paper Sizes	Letter, Legal, Envelopes
Print Speed (Black)	31 ppm