Canon PIXMA MX459 User Manual

Changing the WEP Detailed Settings
Note
This screen is not available depending on the printer you are using.
To change the wireless network settings of the printer, connect the printer and the computer with a
USB cable temporarily. If you modify the wireless network settings of the computer over wireless
connection without USB connection, your computer may not be able to communicate with the
machine after modifying the settings.
1.
Start up IJ Network Tool.
Starting up IJ Network Tool
2.
Select the printer in Printers:.
When the printer is connected to the computer with a USB cable temporarily, select the printer
with "USBnnn" (where "n" is a number) appearing in the Port Name column.
3. Select Configuration... from the Settings menu.
4. Click the Wireless LAN tab.
5.
Select Use WEP in Encryption Method: and click Configuration....
The WEP Details screen is displayed.
6.
Change the settings or confirm.
When changing the password (WEP key), the same change must be made to the password
(WEP key) of the access point.
1.
WEP Key:
Enter the same key as the one set to the access point.
The number of characters and character type that can be entered differ depending on the
key length and key format.
Key Length
64bit 128bit
Key Format
ASCII 5 characters 13 characters
Hexadecimal (
Hex)
10 digits 26 digits
2.
Key Length:
Select either 64bit or 128bit.
3.
Key Format:
Select either ASCII or Hex.

Canon PIXMA MX459 Specifications

General

Print Technology	Inkjet
Max Print Resolution	4800 x 1200 dpi
Scanner Type	Flatbed, ADF
Max Scan Resolution	1200 x 2400 dpi
Connectivity	USB, Wi-Fi
Automatic Document Feeder	Yes
Functions	Print, Copy, Scan, Fax
Paper Capacity	100 sheets
Print Speed (Black)	9.7 ipm
Print Speed (Color)	5.5 ipm
Duplex Printing	Yes
Paper Sizes	Letter, Legal, Envelopes
Fax Speed	Approx. 3 sec per page
Mobile Printing	Yes (AirPrint, Google Cloud Print)
Ink Cartridges	PG-240 Black, CL-241 Color
Display	LCD
Dimensions (W x D x H)	18.1" x 15.2" x 7.9"
Copy Speed (Black)	Approx. 7.0 ipm