Reset setting
You can set the settings back to the default.
• Web service setup only
Sets the Web service settings back to the default.
• LAN settings only
Sets the LAN settings back to the default.
• Settings only
Sets the settings such as the paper size or media type back to the default.
• Reset all
Sets all settings you made to the printer back to the default. The administrator password specified by
Remote UI or IJ Network Device Setup Utility reverts to the default setting.
Note
• You cannot set the following setting items back to the default:
• The language displayed on the touch screen
• The current position of the print head
• CSR (Certificate Signing Request) for encryption method (SSL/TLS) setting
197
To Next Page
Loading...
Need help?
General