Canon PIXMA TS7600i Series User Manual

Select 2-sided Printing from 1-sided/2-sided/Booklet Printing on the Page Setup tab. Uncheck the
Automatic check box.
3. Select the layout3.
Select the layout you want to use from the Page Layout list.
4.
Specify the side to be stapled
4.
The best Binding Location is selected automatically from the Orientation and Page Layout settings.
To change the setting, select another stapling side from the Binding Location list.
5.
Set the margin width
5.
If necessary, click Specify Margin... and set the margin width, and then click OK.
6.
Complete the setup
6.
Click OK on the Page Setup tab.
When you perform print, the document is first printed on one side of a sheet of paper. After one side is
printed, reload the paper correctly according to the message.
Then tap Start print on the printer operation panel to print the opposite side.
Important
• Automatic duplex printing can be performed only when one of the following paper sizes is selected from
Page Size on the Page Setup tab.
Letter 8.5"x11" 22x28cm, A4
• After printing the front page, there is an ink drying wait time before starting to print the back page
(Operation stops temporarily). Do not touch the paper during this time. You can change the ink drying
wait time at Custom Settings in the Canon IJ Printer Assistant Tool.
289

Canon PIXMA TS7600i Series Specifications

General

Print Resolution	Up to 4800 x 1200 dpi
Scanner Resolution (Optical)	1200 x 2400 dpi
Wireless LAN Frequency Band	2.4 GHz
Display Type & Size	2.7 inch / 6.7 cm LCD screen
Duplex Printing	Yes
Functions	Print, Scan, Copy
Printer Type	Inkjet
Print Technology	Thermal Inkjet
Mono Print Speed	15 ppm
Colour Print Speed	10 ppm
Two-sided Printing	Yes
Multiple Copy	Up to 99 pages
Interface Type	USB, Wi-Fi
Mobile Printing	AirPrint, Mopria
Supported Operating Systems	Windows, macOS, iOS, Android
Paper Sizes	A4, A5, B5, Letter, Legal, Envelopes (DL, COM10)
Input Capacity	100 sheets (A4), 20 sheets (Photo paper)
Connectivity	Wi-Fi, USB
Ink Cartridges	2 FINE Cartridges (Black and Colour)