EasyManuals Logo

Canon Powershot S100 Firmware Update Procedure

Canon Powershot S100
4 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
- 1 -
Canon Compact Digital Camera Firmware Update Procedure
PowerShot S100
Firmware is software installed to control the equipment; it is the firmware that handles many of the compact
digital camera's operations, such as shooting or image processing. The instructions that follow explain the
steps for updating the camera with new firmware (by overwriting the existing firmware).
Make sure you have read the precautions and procedures below carefully before updating the firmware.
IMPORTANT: Observe the following precautions when updating the firmware
Please use a fully-charged, dedicated battery pack and a dedicated AC adapter kit to power the
camera.
Before updating the firmware, initialize the SD, SDHC or SDXC memory card in the camera. When you
initialize the SD memory card, any data written on it will be erased, so please be sure to save a copy of
any important data on the card to your computer or somewhere other than the card prior to initializing it.
Please be absolutely sure not to turn the power switch on the camera to OFF during the firmware
update. If using a household power source, please be careful about power outages.
During the firmware update, please do not open the battery cover or the memory card slot cover.
During the firmware update, please do not operate any of the camera's buttons, dials or switches.
After the firmware update is completed, it is not possible to revert back to a previous version.
If the firmware update does not finish normally, or if the camera no longer starts normally, please
contact our camera repair center.
Step 1. Prepare the items required to update the firmware
The following things are required to perform this camera firmware update. Please have these items ready in
advance. Customers who do not have items 2, 3, or 4 listed below are advised to contact our customer support
center.
1. Camera body Model covered by this update
2. Computer OS: Computer with either Windows or Mac OS X
(*1)
3. SD Memory Card
A 32 MB or higher-capacity SD Memory Card, an SDHC Memory Card, or an
SDXC Memory Card (both commercially available)
4. Memory card reader/writer
A memory card reader/writer (commercially available) or an SD card slot on the
computer.
* If using an SDHC/SDXC memory card, you must use it with a compatible card
reader/writer or card slot.
5. Battery
The battery pack that came with the camera (NB-5L)
Or dedicated AC Adapter Kit (ACK-DC30)
6. Firmware update file The file that can be downloaded from the Web site.
*1: OS Requirements: Windows 7 (Service Pack 1), Windows Vista (Service Pack 2), Windows XP (Service Pack 3), or Mac OS X (10.5-10.6).

Other manuals for Canon Powershot S100

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Canon Powershot S100 and is the answer not in the manual?

Canon Powershot S100 Specifications

General IconGeneral
Camera typeCompact camera
Sensor typeCMOS
Image stabilizerYes
Image sensor size1/1.7 \
Supported aspect ratios3:2, 4:3, 16:9
Maximum image resolution4000 x 3000 pixels
Still image resolution(s)384 x 480, 480 x 480, 640 x 360, 640 x 424, 640 x 480, 960 x 1200, 1200 x 1200, 1600 x 1064, 1600 x 1200, 1696 x 2112, 1920 x 1080, 2112 x 2112, 2400 x 3000, 2816 x 1584, 2816 x 1880, 2816 x 2112, 2992 x 2992, 4000 x 2248, 4000 x 2664
Digital zoom4 x
Optical zoom5 x
Combined zoom20 x
Focal length range5.2 - 26 mm
Maximum aperture number5.9
Minimum aperture number2
Lens structure (elements/groups)7/6
Maximum focal length (35mm film equiv)120 mm
Minimum focal length (35mm film equiv)24 mm
FocusTTL
Auto focusing (AF) modesContinuous Auto Focus, Multi Point Auto Focus, Single Auto Focus
Closest focusing distance0.03 m
Light meteringCentre-weighted, Spot
ISO sensitivity80, 100, 125, 160, 200, 250, 320, 400, 500, 640, 800, 1000, 1250, 1600, 2000, 2500, 3200, 4000, 5000, 6400, Auto
Light exposure modesAperture priority AE, Auto, Manual, Shutter priority AE
ISO sensitivity (max)6400
ISO sensitivity (min)80
Light exposure controlProgram AE
Light exposure correction± 3EV (1/3EV step)
Fastest camera shutter speed1/2000 s
Slowest camera shutter speed15 s
Flash modesAuto, Flash off, Flash on, Red-eye reduction, Slow synchronization
Flash range (tele)0.5 - 2.3 m
Flash range (wide)0.5 - 7 m
Digital SLRNo
Power source typeBattery
Camera shutter speed1 - 1/2000; 15 - 1/2000 s
Video memory capacity4GB
Compatible operating systemsWindows 7 / 7 SP1 / Vista SP2 / XP SP3 Mac OS X v10.5 – 10.6
Scene modesBeach, Fireworks, Night, Portrait, Self-portrait, Snow, Underwater, Landscape (scenery)
Image editingResizing
Photo effectsBlack&White, Neutral, Positive film, Sepia, Skin tones, Vivid
White balanceAuto, Cloudy, Custom modes, Daylight, Fluorescent, Tungsten
Camera playbackMovie, Single image
Image processorDIGIC 5
Self-timer delay2, 10 s
Camera file systemDPOF 1.1, Exif 2.3
Playback zoom (max)10 x
On Screen Display (OSD) languagesARA, CHI (SIMPL), CHI (TR), CZE, DAN, DEU, DUT, ENG, ESP, FIN, FRE, GRE, HUN, ITA, JPN, KOR, NOR, POL, POR, RUM, RUS, SWE, THA, TUR, UKR
Video resolutions320 x 240, 640 x 480, 1280 x 720 pixels
Motion JPEG frame rate24 fps
Video formats supportedH.264, MOV
Maximum video resolution1920 x 1080 pixels
Analog signal format systemNTSC, PAL
Internal memory- MB
Compatible memory cardsSD, SDHC, SDXC
Field of view100 %
Display diagonal3 \
Display resolution (numeric)461000 pixels
USB version2.0
Product colorSilver
Battery typeNB-5L
Battery life (CIPA standard)200 shots
Operating temperature (T-T)0 - 40 °C
Operating relative humidity (H-H)10 - 90 %
Weight and Dimensions IconWeight and Dimensions
Depth26.7 mm
Width98.9 mm
Height59.8 mm
Weight (including battery)198 g

Related product manuals