ENG-6
❶
❷
1. Open the battery compartment by sliding the cover in
the direction of the arrows. (Fig.
❶
:
①②
)
2. Insert (or remove) the batteries, making sure that
they are in the correct direction (see diagram inside
cover). (Fig.
❶
)
3. After closing the battery compartment, slide the
cover in the direction of the arrow until it clicks. (Fig.
❷
:
①②
)
Non-alkaline AAA batteries lack unified standards
for contact point shapes, so the brand you use may
cause problems with contact.
Inserting and
Removing Batteries
1
■ Removing
1. Turn the attach/detach lever in the direction of the
arrow
②
while pressing down on the attach/detach
lever lock release button. (
①②
)
2. Remove the protective cover from the movable
mounting catch. (
③
)
■ Attaching
1. Attach the protective cover to the adapter in the
reverse order for removing it.
2. Turn the attach/detach lever in the direction of the
arrow
④
until it clicks to fasten the cover to the
adapter. (
④
)
Removing and Attaching
Protective Cover
2
To Next Page
Loading...
Need help?
General
