To Next PageTo Next Page
Need help?Do you have a question about the Canon Speedlite 430EX II and is the answer not in the manual?
General| Flash Coverage | 24-105mm (14mm with wide panel) |
|---|---|
| Exposure Control | E-TTL II/E-TTL/TTL |
| Power Source | 4 x AA batteries |
| Auto Zoom Head | Yes |
| Compatibility | Canon EOS cameras |
| Guide Number | 43 (at ISO 100, 105mm) |
| Recycling Time | 0.1-3.7 seconds |
| Dimensions | 72 x 122 x 101 mm |
| Weight | Approx. 320 g (without batteries) |
| Type | Shoe Mount |
| Bounce Head | Up to 90° |
| Swivel Head | 180° left, 90° right |
| Wireless Functionality | Yes (slave mode) |
Step-by-step guide to inserting AA batteries into the flash unit.
Instructions for mounting the Speedlite onto a camera's hot shoe and removing it.
How to power on the Speedlite and check its readiness.
Guide to using the Speedlite in automatic flash modes with the camera.
Explanation of how to use E-TTL II/E-TTL autoflash with different camera shooting modes.
How to adjust flash output for brighter or darker exposures.
How to lock the flash exposure setting for a specific subject.
Using flash at shutter speeds faster than the camera's sync speed.
How to achieve a light trail effect by firing flash at the end of exposure.
Directing flash off surfaces like walls or ceilings for softer light.
Adjusting flash coverage to match lens focal length and using the wide panel.
Setting flash output power manually for precise control.
Customizing Speedlite features through various settings.
Automatic adjustment of flash coverage based on camera sensor size.
How flash color temperature data is transmitted to the camera for white balance.
Information on the Speedlite's autofocus assist beam functionality.
Controlling Speedlite settings directly from the camera's menu.
Guide to setting up and using the Speedlite in a wireless flash system.
How to set manual flash output for slave units.
System overview, troubleshooting, specifications, and camera compatibility.
