Canon TC-80N3 User Manual

QuickGuide to Canon TC-80N3 Timer/Remote
Controller
Article ID: ART170210
|
Date published: 05/02/2018
|
Date last updated: 09/11/2018
Description
QuickGuide to Canon TC-80N3 Timer/Remote Controller
Solution
Overview
The TC-80N3 Timer/Remote Controller is a programmable electronic shutter release. When you
connect it to your EOS SLR or DSLR it will allow you to control:
1. when the shutter opens (self-timer mode)
2. how frequently the shutter opens (interval timer mode)
3. how long the shutter stays open (long-exposure timer mode)
4. how many exposures the camera will make in total (exposure count mode)
You can also combine modes: For example, you can program the controller to wait five minutes,
release the shutter, then take a total of 25 exposures at five minute intervals. Refer to the
Combinations Chart for more details.
The TC-80N3 also includes a remote switch that provides the same functions as your camera’s
1 of 7

Canon TC-80N3 Specifications

General

Interval Timer	Yes
Long Exposure Timer/Control	Yes
Self-Timer	Yes
Maximum Interval	99 hours, 59 minutes, 59 seconds
Maximum Number of Shots	99
Power Source	2 x AAA batteries
Intervalometer Function	Yes
Compatibility	Canon EOS cameras with N3-type terminal
Cable Length	80 cm
Connector	N3-type

Summary

Product Introduction and Overview

Description

Brief introduction to the Canon TC-80N3 Timer/Remote Controller.

Overview

General introduction to the TC-80N3 timer/remote controller and its functions.

Device Setup and Compatibility

Compatible Cameras

Lists cameras that can be used with the TC-80N3, noting adapter requirements.

Connecting and Disconnecting

Step-by-step instructions for attaching and detaching the TC-80N3 to a camera.

Timer Functionality

Setting a Time Amount

Guide on how to set time values (seconds, minutes, hours) for timer functions.

Self-timer Mode

How to use the self-timer function, including pausing and combining with other modes.

Interval Timer Mode

Instructions for setting and using the interval timer for sequences of exposures.

Long Exposure Mode

Details on setting up and using the long exposure timer mode with Bulb setting.

Exposure Count

How to set the number of exposures for a sequence, including unlimited options.

Advanced Features and Operations

Hold Function

Explains how to activate/deactivate the Hold function to prevent accidental changes.

Cancelling Settings

Procedures for resetting all timer settings to default or zero.

Remote Switch Function

Describes the TC-80N3's operation as a simple remote shutter release without timer functions.

Timer Mode Combinations

Overview of how different timer modes can be combined for advanced shooting scenarios.