Canon VIXIA HF R42 User Manual

100  Advanced Playback and Editing
Trimming Scenes
You can trim MP4 scenes by removing everything up to a certain point
or everything after a certain point. By doing so, you leave only memo-
rable moments to keep for posterity.
Operating modes:
1 Play back the desired scene (A 50).
2 Touch the screen and then touch [Ý] to pause the playback.
3 Open the screen for trimming scenes.
4 Bring the scene to a precise point, if necessary.
• The point at which is movie will be trimmed is indicated by the
marker.
• Playback controls will appear on the screen (A 52). Use any special
playback modes (fast playback, frame reverse/advance) as
necessary to locate the desired point.
5 Trim the scene.
Touch [Stop] to interrupt the operation while it is in progress.
NOTES
• You may not be able to trim the following types of scenes.
- 6/4 Scenes copied from the built-in memory to an SDXC
memory card.
- Scenes recorded or copied using another device.
SCN
[Edit] > [Trim]
[Trim] > Select whether to trim before or after the
marker > Select whether to save as a new scene or write
over the existing scene
COPY

Canon VIXIA HF R42 Specifications

General

Sensor Type	CMOS
Optical Zoom	32x
LCD Screen Resolution	230, 000 dots
Focus System	Instant AF
Recording Media	SD/SDHC/SDXC Memory Card
Video Recording Format	AVCHD, MP4
Maximum Video Resolution	1920 x 1080
Built-in Memory	8 GB
Built-in Wi-Fi	Yes
Speaker	Built-in speaker
HDMI Output	Yes
Effective Pixels	3.28 MP
LCD Screen Size	3.0 inches
LCD Screen Type	Touchscreen
Image Stabilization	Optical Image Stabilization
Frame Rate	24p, 30p
Microphone	Built-in microphone
Weight	8.5 oz.