Canon VIXIA HF R42 User Manual

Preparations  29
Inserting and Removing a Memory Card
If you plan on using a memory card, turn off the camcorder before per-
forming the initial setup and then insert the memory card. After per-
forming the initial setup, initialize the memory card (A 33).
1 Open the LCD panel.
If this is your first time to turn on
the camcorder, the language
selection screen of the initial
setup screens will appear.
2 Press to turn off the
camcorder.
Make sure the POWER/CHG
indicator is off.
3 Open the memory card slot
cover.
4 Insert the memory card at a
slight angle, with the label
facing toward the lens, all the
way into the memory card slot
until it clicks.
The memory card slot is at a
slight angle toward the lens so
be careful not to damage the
memory card when inserting it.
5 Close the memory card slot
cover.
Do not force the cover closed if the memory card is not correctly
inserted.
To remove the memory card
Push the memory card once to release it. When the memory card
springs out, pull it all the way out.



Memory card
Lens
Top view
COPY

Canon VIXIA HF R42 Specifications

General

Sensor Type	CMOS
Optical Zoom	32x
LCD Screen Resolution	230, 000 dots
Focus System	Instant AF
Recording Media	SD/SDHC/SDXC Memory Card
Video Recording Format	AVCHD, MP4
Maximum Video Resolution	1920 x 1080
Built-in Memory	8 GB
Built-in Wi-Fi	Yes
Speaker	Built-in speaker
HDMI Output	Yes
Effective Pixels	3.28 MP
LCD Screen Size	3.0 inches
LCD Screen Type	Touchscreen
Image Stabilization	Optical Image Stabilization
Frame Rate	24p, 30p
Microphone	Built-in microphone
Weight	8.5 oz.