30
Configuring Network Settings
The following instructions are for settings screens that vary depending on the communication
method (FTP Transfer, EOS Utility, or WFT Server), as shown below. Read the page that
introduces the selected communication method.
FTP trans.
Chapter 2 (p.33)
EOSUtility
Chapter 3 (p.47)
WFTserver
Chapter 4 (p.53)
Completing Settings for the Communication Method
Windows Vista Users
Before performing the operations from page 47, perform the operations below. If these operations are
not performed, the WFT Pairing Software described on page 48 may not start.
Open the [C Drive] [Program Files] [Canon] [EOS Utility] [WFTPairing] folder (in this
order), and then double-click the [WFT FirewallSettings] icon.
After performing this operation, perform the operation on page 47.
To Next Page
Loading...
Need help?
General
