39
Transferring Images Individually
You can add a registered caption to each image before transfer. This is effective if you want to
inform the recipient the printing quantity, for example. The caption is also added to images
stored on the camera.
For instructions on creating and registering captions, refer to page 114.
You can check for captions added to images by examining the Exif information, in the user
comments.
1
Take the picture.
2
In [WFT settings], select [Transfer with
caption].
X The last captured image is displayed.
It is not possible to select other images on the
[Transfer with caption] screen. To select another
image for transfer with a caption, view that image
before following these steps.
3
Select a caption.
Turn the <5> dial to select the [Caption] frame,
and then press <0>.
Turn the <5> dial to select the content of the
caption, and then press <0>.
4
Transfer the image.
Turn the <5> dial to select [Transfer], and then
press <0>.
Adding a Caption Before Transfer
If you add captions to images that include original decision data, these images are no longer judged to
be original images.
To Next Page
Loading...
Need help?
General
