131
Assignable Buttons
English
* This function can be used only by assigning it to an assignable button.
** This function can only be assigned to assignable buttons 1 to 4.
[Tele-converter]
Activates the digital tele-converter in the following sequence:
1.5x J 3x J 6x J Off
Ü – 74
[Wide-End Angle] Toggles the angle of view at wide-angle end between [Normal] and [Wider]. Ü – 74
[Gain Mode] Toggles the gain mode between [Automatic] and [Manual]. Ü – 62
[Shutter Mode] Toggles the shutter speed mode between [Automatic] and [Manual]. Ü –
58
[Shutter Increment] Changes the shutter speed increment between [Normal] and [Fine]. Ü –
[WB Mode]
Toggles the white balance mode between automatic white balance (AWB) and
the current position of the WHITE BAL. switch.
Ü – 69
[PEAKING] Turns peaking on/off. Ü – 84
[ZEBRA] Turns zebra patterns on/off. Ü – 89
[WFM]
Activates video scopes in the following sequence:
Waveform monitor J Vectorscope J Edge monitor ( mode only) J Off
Ü Ü 108
[MAGN.] Turns magnification on/off. Ü – 84
[TL-H58] Sets the [~ Camera Setup] > [Conversion Lens] setting to [TL-H58] or [Off]. Ü –
80
[WA-H58] Sets the [~ Camera Setup] > [Conversion Lens] setting to [WA-H58] or [Off]. Ü –
[Color Bars] Turns color bars on/off. Ü – 107
[Infrared Monochrome] Switches between white and green when the camcorder is in infrared mode. Ü – 126
[Infrared Light]
Turns the infrared light on/off when [~ Camera Setup] > [Infrared] >
[Light] is set to [Toggle].
Ü – 126
[Markers] Turns onscreen markers on/off. Ü – 88
[OLED Setup] Opens the [OLED Setup] submenu. Ü Ü 34
[Viewfinder Setup] Opens the [Viewfinder Setup] submenu. Ü Ü 34
[OLED/VF B&W] Turns the B&W mode of the OLED screen and viewfinder on/off. Ü Ü 35
[Onscreen Display]
Turns on/off the inclusion of onscreen displays on video output from the
camcorder’s terminals (both HD and SD video output).
Ü Ü 165
[MP4 Start/Stop]** Starts or stops recording an MP4 clip. Ü – 123
[MP4 FTP Transfer]* Adds the MP4 clip that was just recorded to the FTP transfer queue. Ü – 190
[Add Shot Mark 1] Adds an " mark to the clip. Ü Ü
110
[Add Shot Mark 2]* Adds an # mark to the clip. Ü Ü
[Add $ Mark] Adds an $ mark to the clip. Ü Ü
152
[Add % Mark] Adds a % mark to the clip. Ü Ü
[Time Code] Displays the [Time Code] submenu. Ü – 90
[Time Code Hold]* Puts the time code display on hold or resumes it. Ü Ü 91
[HEADPHONE +] Increases the headphone volume. Ü Ü
149
[HEADPHONE -] Reduces the headphone volume. Ü Ü
[Monitor Channels] Switches the audio output channel. Ü Ü 166
[Audio Level] Turns the audio level meter on/off. Ü Ü
105,
106
[Wireless Controller]
Turns the supplied wireless controller on/off. Ü Ü 44
[Photo]* Records a photo. Ü Ü 195
[Status]* Displays the status screens. Ü Ü 209
[My Menu] Opens the [My Menu] customized submenu. Ü – 30
[Initialize Media] Opens the [Initialize Media] submenu. Ü Ü 41
[User Setting]*
Customizable slot. Assign to the button any menu setting you would like to
register.
Ü Ü –
Function name Description A
COPY
To Next Page
Loading...
Need help?
General
