EN - 4
[M] to select Chronograph Mode.
z At Chronograph Mode, press [S/S] to start counting and beeping
simultaneously. Press the button again to stop counting and beeping.
Dual Time Mode
z Press and hold [M] for 2 seconds to enter Settings Mode.
z Press [M] to shift through different digits. Press [S/S] and [L/R] to
adjust values.
z Press [M] to save modified settings and exit Settings Mode.
Altimeter Mode
z Press [SR] anytime during main menu to cycle through Altimeter
Mode, Barometer Mode, and Compass Mode.
z At the device screen display during Altimeter Mode, 1 of 2 Altimeter
functions, temperature or history, will be displayed at the top row.
z Current (history) altitude and the current (history) time are displayed
at the middle row and bottom row of the display respectively.
NOTE:
To obtain more accurate readings, please keep the device away from body
which will minimize effect of body heat.
z Press and hold [L/R] to obtain immediate readings. The temperature
is displayed in degree Celsius (˚C) or degree Fahrenheit (˚F).
z The device automatically records the altitude reading every 60
minutes and plots the data into an altitude bar graph as History
display.
z Press [L/R] to review altitude records and their recording time of the
last 23 hours in order. Press [S/S] to switch between measurement
units including altitude units meter(m)/feet(ft) and temperature
units (˚C)/ (˚F).
z There are 4 methods to adjust/ calibrate altimeter functions including
Zero Altitude, Absolute Altitude, Sea Level Pressure and Factory
Default Adjustment. Please refer to user manual for more details.
To Next Page
Loading...
