What to do if my Canyon SPECTRAL:ON CF8 battery has triggered short circuit protection?
If the battery has triggered short circuit protection, remove the external object causing the short circuit for 30 seconds.
What to do if my Canyon Bicycle battery has run out of capacity?
If the battery has run out of capacity and the system has triggered the lowest level of voltage protection, start charging the battery.
What to do if my Canyon SPECTRAL:ON CF8 Bicycle battery has triggered high or low temperature protection?
If the battery has triggered high or low temperature protection, move the battery to a location with a temperature of 5 ~ 40 °C.
What to do if my Canyon SPECTRAL:ON CF8 battery has triggered permanent failure protection?
If the battery has triggered permanent failure protection or further safety measures, stop charging and contact the place of purchase or a bicycle dealer.
What to do if my Canyon Bicycle battery flashes during charging?
If, after long term use, the battery flashes for 10 seconds during charging, stop charging and contact the place of purchase or a bicycle dealer.
Emphasizes correct torque usage and specifies approved charger types.
Procedures for disconnecting the battery and the charging process.
Steps to connect the battery and operate the bike's power.
Safety warnings and important precautions for maintenance procedures.
Important steps to take before removing the battery.
Instructions for safely removing the bicycle battery.
Details system issues, corresponding LED warning codes, and recommended actions for troubleshooting.
To Next Page
General