capello Ci300 - Navigation and Programming; Timer and Sleep Functions; Setting the Sleep Timer

using forward/reverse and skip/search
! To SKIP FORWARD OR BACKWARD on the disc: Press the SKIP UP + or SKIP DOWN – button to skip
to the beginning of the current/ previous, or next track.
" To SEARCH FORWARD OR BACKWARD on the disc: Press and hold the SKIP UP + or SKIP DOWN – button
to search within track that is currently playing.
CD memory programming (up to 20 tracks)
Programming is the ability to preselect the order in which a series of tracks will be played.
! While in the STOP mode, press the PROGRAM / CLOCK SET button. “MEM”, the track number and “Pr01”
(the program number) will appear in the display.
" Select a track to be programmed using the SKIP UP + or SKIP DOWN – button.
# Press the PROGRAM / CLOCK SET button to memorize the track. Repeat Steps 2 and 3 to program additional
tracks up to a maximum of 20 tracks.
$ Press the PLAY / PAUSE


button to begin program playback.
notes: To CLEAR THE MEMORY: While in the STOP mode, press the STOP

button.
CD playback from a specific track
! While in STOP mode, press either the SKIP UP + or SKIP DOWN – button to select a specic track
for playback.
" When the desired track/le is selected, press the PLAY / PAUSE


button and playback will begin with
the track/le you selected.
setting the timer
! With the unit off, press and hold the TIMER button until the TIMER ON hour blinks in the display for a
few seconds.
" Within a few seconds, press the SKIP UP + or SKIP DOWN – button to set the TIMER ON hour. Then press the
TIMER button again to conrm. Repeat to set the TIMER ON minute.
# Press the SKIP UP + or SKIP DOWN – button to set the desired mode (iPod, Tuner, CD). Then press the
TIMER button again to conrm.