Instruction manual DD901BK
14
Please keep this instruction manual for future reference
APPLIANCE DESCRIPTION
NOTE: The Downdraft worktop cutout can be connected to the hob cutout, but only for electric
hobs.
For gas hobs, a minimum 50mm gap must be left beetween the edge of the gas hob and the
downdraft frame.
OF THE APPLIANCE
INC
6
Note: The Downdraft worktop cutout can be connected to the hob cutout,
but only for electric hobs.
For gas hobs, a minimum 50mm gap must be left beetween the edge of
the gas hob and the downdraft frame
OF THE APPLIANCE
INC
6
Note: The Downdraft worktop cutout can be connected to the hob cutout,
but only for electric hobs.
For gas hobs, a minimum 50mm gap must be left beetween the edge of
the gas hob and the downdraft frame
To Next Page
Loading...