Caple DD901BK - Troubleshooting

Instruction manual DD901BK
18
Please keep this instruction manual for future reference
TROUBLESHOOTING
AFTER SALES SERVICE
Any maintenance operation on your appliance should be carried out by:
- Either your retailer;
- A Caple approved engineer, or similarly qualified personnel.
PROBLEM SOLUTION
The cooker hood does not
work...
Check that:
- There is not a power outage.
- A specific speed has actually been selected.
- The 9 pole connection is inserted properly.
- The red reset key, found over the electrical system box, is pushed.
- Make sure that the wires of the 9 pole connection are inserted properly in the
connector itself (during the connection phase, an excessive pressure could bend the
contacts).
The cooker hood has low
performances...
Check that:
- The motor speed selected is sufficient for the quantity of fumes and vapors present
in the room.
- The kitchen is ventilated well enough to allow air for intake.
- The charcoal filter is not worn out.( filtering version cooker hood).
- The air outlet channel is free and compliant with paragraph no. 2.
- The non-return valves of the suctioning unit are free to rotate.
The cooker hood stops in the
middle of operation.
Check that:
- There is not a power outage.
- The omnipolar device has not tripped.