Instruction manual Di4826
Please keep this instruction manual for future reference
- If the supply cord is damaged, it must be replaced by
Caple, its service agent or a similarly qualified person in
order to avoid a hazard.
- During installation, the power supply must not be
excessively or dangerously bent or flattened.
- The dishwasher must not be installed under a hob.
- Do not tamper with controls.
- The appliance is to be connected to the water mains
using new hose sets and that old hose-sets should not
be reused.
- The maximum permissible inlet water pressure is 1MPa.
- The minimum permissible inlet water pressure
is 0.04MPa.
To Next Page
Loading...
