Instruction manual Di6536 Please keep this instruction manual for future reference
- If the supply cord is damaged, it must be replaced by Caple,
its service agent or a similarly qualified person in order to
avoid a hazard.
- During installation, the power supply must not be
excessively or dangerously bent or flattened.
- The dishwasher must not be installed under a hob.
- Do not tamper with controls.
- The appliance is to be connected to the water mains using
new hose sets and that old hose-sets should not be reused.
- To save energy, in stand by mode, the appliance will switch
off automatically while there is no any operation in 30
minutes.
To Next Page
Loading...
