Instruction manual Di653 57
Please keep this instruction manual for future reference
ERROR CODES
If there is a malfunction, the dishwasher will display error codes to identify these:
CODES MEANINGS POSSIBLE CAUSES
E1
Longer inlet time.
Tap is not opened, or water intake is restricted, or water
pressure is too low.
E3
Not reaching required
temperature.
Malfunction of heating element.
E4
Overflow. Some element of dishwasher leaks.
E8
Failure of orientation of
distributary valve.
Open circuit or break of distributary valve.
EC
Washing control system fail. PCB or motor fail.
ED
Failure of communication
between main PCB with
display pcb.
Open circuit or break wiring for the communication.
WARNING:
› If overflow occurs, turn off the main water supply before calling a service.
› If there is water in the base pan because of an overfill or small leak, the water should be
removed before restarting the dishwasher.
To Next Page
Loading...
