Instruction manual Di65356 Please keep this instruction manual for future reference
CLOUDINESS ON
GLASSWARE.
Combination of soft water and
too much detergent.
Use less detergent if you have soft water and select a
shorter cycle to wash the glassware and to get them clean.
WHITE SPOTS APPEAR
ON DISHES AND
GLASSES.
Hard water area can cause
limescale deposits.
Add more detergent.
BLACK OR GREY
MARKS
ON DISHES
Aluminium utensils have
rubbed against dishes
Use a mild abrasive cleaner to eliminate those marks.
DETERGENT LEFT IN
DISPENSER
Dishes block detergent
dispenser.
Re-loading the dishes properly.
THE DISHES AREN’T
DRYING
Improper loading. Load the dishwasher as suggested in the directions.
Dishes are removed too soon.
Do not empty your dishwasher immediately after washing.
Open the door slightly so that the steam can come out. Take
out the dishes until the inside temperature is safe to touch.
Unload the lower basket first to prevent the water dropping
from the upper basket.
Wrong programme has
been selected.
With a short programme, the washing temperature is lower,
decreasing cleaning performance. Choose a programme with
a long washing time.
Use of cutlery with a low-
quality coating.
Water drainage is more difficult with these items. Cutlery or
dishes of this type are not suitable for washing in
the dishwasher.
To Next Page
Loading...
