Installation of Shelves
To fit or remove the shelf, tilt the shelf as per the diagram and simply pull out, or push the
shelf in until it sits on the support brackets securely.
NOTE:
• If the unit is unplugged, if power is lost, or turned-off, you must wait 3 to 5 minutes before
restarting the unit. If you attempt to restart before this time delay, the wine cellar will not
start.
• When you use the wine cellar for the first time or restart the wine cellar after it has been
switched off for a long time, there could be a few degrees variance between the
temperature you select and the one indicated on the LED readout. This is normal and it
is due to the length of the activation time. Once the wine cellar has been running for a
few hours, the temperature display will re-gain accuracy.
To Next Page
Loading...
