Using the shelves
• To prevent damaging the door gasket, make sure you have the door fully open when pulling
shelves out of the rail compartment.
• For easy access to the storage content, you must pull the shelves approximately 1/3 out of the rail
compartment, however this unit was designed with a notch on each sides of the shelf tracks to
prevent bottles from falling
.
Removing or installing shelves
• When removing any of these shelves from the rail compartment, tilt the shelf as per the diagram
and simply pull out or to reinstall the shelf push it in until it sits on the support brackets securely.
6
To Next Page
Loading...
