b. With a coin, turn the screw on
top of the feeder channel a
quarter turn counter clockwise
to the 12 o’clock position.
c. Firmly lift the feeder channel
cover upwards and to the right
as shown, and set aside.
Note: The feeder channel cover
will make a "snapping" sound
when it is lifted from the
machine.
d. Move the filter holder under-
neath the grinder until it locks.
e. Use the handle of the scoop to
scrape out blocked coffee or
leftover toast into the filter holder.
f. Wipe the inside clean with a dry
cloth.
closed
open
18
To Next Page
Loading...
