Capresso 455 - Adjusting Grinder Settings; Handling Power Interruptions

c) Changing the Grinder Setting
Please note: the CoffeeTEAM Therm lets you set two different
grinder settings: one for immediate use (display shows ”NOW”)
and one for Auto-On use (display shows “AUTO”).
In the following examples we are setting the grinder for immediate
use to "6 cups MILD" and for the Auto-On use to "8 cups
STRONG".
d) Setting the grinder to 6 cups MILD “NOW”
e) Setting the Auto-On grinder to 8 cups STRONG
7.3 Power Interruption
• If you have a power interruption or if you unplug the machine
for less than 2 to 3 minutes, the display and all set functions
will remain. If the machine was set to AUTO, it will still grind
and brew coffee at the pre-set time. If the machine was brewing
coffee it will continue brewing until the water tank is empty.
Action
•
Push the P button.............................
• Push the P button.............................
• Push the P button..............................
• Turn the P button to select from
4,6,8, or 10 cups...............................
• Push the P button.............................
• Turn the P button to select from
MILD, MEDIUM, STRONG................
• Push the P button. The display will
show the actual time and the new
grinder setting 6 c MILD
• Push the P button to confirm the
new setting. The display shows the
actual time and the new grinder
setting 6c MILD.................................
Display shows
3:16 AM / 10c MEDIUM
PROGRAM GRINDING? >
GRINDING < NOW? >
GRINDING NOW < 10 c >
GRINDING NOW < 6 c >
TASTE NOW <MEDIUM>
TASTE NOW < MILD >
3:16 AM / 6 c MILD
Action
• Push the P button.............................
• Push the P button.............................
• Turn the P button to select AUTO.....
• Push the P button.............................
• Turn the P button to select from
4,6,8, or 10 cups...............................
• Push the P button.............................
• Turn the P button to select from
MILD, MEDIUM, STRONG................
• Push the P button to confirm. The
display will immediately revert to the
actual setting.....................................
To check the new Auto-Setting, push
the A-button. The button will illumi-
nate green and the display will show:
Push the A-button again, the green
illumination will disappear and the
display will revert to the actual time
and grinder setting
Display shows
3:16 AM / 6c MILD
PROGRAM GRINDING? >
GRINDING < NOW? >
GRINDING < AUTO? >
GRIND AUTO < 10 c >
GRIND AUTO < 8 c >
TASTE AUTO <MEDIUM>
TASTE AUTO <STRONG>
3:16 AM / 6 c MILD
6:20 AM / 8 c STRONG
9.