EasyManua.ls Logo

Capri Tools CP32500 - Operation Safety; Work Area Safety

Capri Tools CP32500
8 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
5
www.capritools.com
Do not use the tool for non-intended purposes.
Keep yourself well balanced with proper footing at
all times.
Keep your hands dry, clean, and free from oil and
grease.
Do not depress the trigger when connecting to the
air supply.
Do not trigger the tool until all adjusting keys and
wrenchesareremovedfromthetool.
Do not trigger the tool when it is not applied
directly to intended work objects. Attachments can
loosen and become dangerous projectiles.
Do not point the tool at yourself or anyone else.
Do not carry the tool by the hose.
Do not exceed 90 PSI air pressure.
Do not use oxygen or gases to power the tool.
airhosetothetool.Thevibrationsfromoperating
the tool will damage the coupler. Use a leader
hose to connect the air hose to the tool. The leader
hosereducesvibrationtocouplersandenhances
exibilityandsafety.
Do not use attachments that are worn or
damaged.
Use only attachments with mandrel matching the
size of the collet of the tool.
• Useonlyttingswith1/4”NPTthread.
Use only attachments rated for the speed of the
tool. Attachments can fall apart and become
dangerousprojectileswhenrunoverratedspeed.
Do not use saw blades or toothed blades with the
tool. Grinders are not designed to be used with
saw blades and doing so can cause serious injury.
Replace worn attatchments.
Verify the integrity of any new wheel or attachment
by running it at no load for one minute.
It can result in explosion.
• Donotputhandsandbodynearmovingparts.
• Donotusethetoolnearliveelectricity.Thetoolis
not electrically insulated.
• Turn o the air supply, depress the trigger to
release residual air, and disconnect the air
line from the tool each time before changing
attachments.
• Turn o the air supply, depress the trigger to
release residual air, and disconnect the air line
from the tool when the tool is not in use.
Keep work areas clean, well-lit and organized.
• Keepworkareaswellventilatedandfreeof
combustible materials.
• Donotallowchildrenornonqualiedindividuals
in the work area.
DO NOT DISCARD THIS MANUAL
WARNING: operation Safety
WARNING: work area Safety