Need help?Do you have a question about the Capri Tools CP32500 and is the answer not in the manual?
General| Brand | Capri Tools |
|---|---|
| Model | CP32500 |
| Category | Grinder |
| Language | English |
Read manual, wear safety gear, restrain long hair, avoid operating when tired or under influence.
Turn off air supply for maintenance. Lubricate tool daily, before storage. Do not modify or attempt repairs.
Do not use damaged tools. Verify air supply system integrity. Ensure hoses and fittings are damage-free.
Use tool for intended purposes, maintain balance, keep hands dry, do not point tool at others.
Keep work areas clean, well-lit, ventilated, and free of combustibles. Keep children away.
Recommended setup: Do not exceed 90 PSI. Install check valve, shut-off valves, FRL module. Use leader hose.
Lubricate tool before first use, daily, and before storage. Moisture degrades components. Follow steps for lubrication.
Die grinder for grinding/deburring. Drain air tank. Lubricate tool. Use correct attachments. Maintain balance.
Loosen collet, insert attachment, tighten collet. Ensure attachment is fastened tightly. Use correct mandrel size.
Use speed control dial. Engage safety lever to start. Disengage to stop. Turn exhaust away from body.
To Next Page