Capristo CES-3 User Manual

DATA
CONNECT
FM
STATUS
RC
GPS
DATA = Bluetooth data transfer
CONNECT = Bluetooth connection
FM = RDS in operation
STATUS = device in operation
RC = remote reception
Blue dot = hidden magnet switch
Backpressure port
hose to muff ler
Ground and antenna
Valve 1
Valve 2
or vacuum pump
Buttons during operation
By pressing the buttons 1, 2 or 4 the device will switch between the di erent modes. In cruise mode (button 1), the
valves open at higher engnie power (parameter adjustable). In sport mode this already happens at lower backpres-
sure (parameter adjustable). Button 4 opens the valves directly (ECE control "grey" short-term / non-ECE control
"yellow" permanent).
The internal radio transmitter is tuned to 88.1 MHz. It can display information on the radio‘s display. With button 3
you can switch between di erent screens: You can display the current mode, the pressure or overall status. Setup
functions are also possible using the radio display.
See the following pages for more information regarding usage.
Capristo Automotive GmbH - Kalmecke 5 - D 59846 Sundern Germany
7
Button 1 = cruise mode
Button 2 = sports mode
Button 3 = alternate radio display
Button 4 = open valves instantly
Controll LED = transmitting/Batt. OK
1
2
3
4
(model example)

Capristo CES-3 Specifications

General

Brand	Capristo
Model	CES-3
Category	Controller
Language	English