Captron HeliCommand 3A 3D RIGID - Page 4

4
• Stabilises all horizontal control movements: inclination (tilt), speed, position
• Auxiliary „pilot“ channel for adjusting stabilisation effect and switching
between horizontal mode and position mode
• Integral heading-lock (AVCS) gyro
• Second auxiliary channel (“AUX channel”) for gyro gain and mode,
optionally for automatic trim.
• Internal swashplate mixer
• Can be congured without connection to a PC by simple learning procedure,
for up to 3 head servos
• Fail-safe if radio link fails (PPM / FM only): switches to position stabilisation,
coll.pitch to ‘hold’.
• Suitable for internal-combustion and electric-powered helicopters
• Can be used indoors and in the open air
• PC adaptor available as accessory, for setup of 4 head servos, optimisation
for stabilisation and tail gyro, and additional options like automatic trim,
freewheel function for forward ight, etc.
HeliCommand 3D
Includes all the features of the basic “3A” version, plus:
• Horizontal stabilisation for inverted ying
• Expanded set-up facilities via PC adaptor (No. 84942000) (additional Expert
settings for optimising the tail gyro, 3D mode and control characteristics).
HeliCommand 3A