Please note:
1. Read these instructions completely and comply with all requirements.
2. Retain these instructions for reference.
3. Comply with all instructions and warnings, both in this manual and on the
product.
4. Disconnect the monitor from all power before cleaning. Use a damp cloth for
cleaning; do not use liquid or aerosol cleaners.
5. Never use the monitor in damp areas or near water.
6. Never place the monitor on an unstable surface; if the monitor falls it may
cause serious damage to people or property.
7. When selecting a location for placement/installation:
A. Always allow for sucient ventilation: leave a minimum distance of 4”
around the monitor.
B. Never allow anything (e.g. paper, cloth, etc.) to obstruct the monitor
ventilation openings.
C. Never allow an open flame source (e.g. lighted candles) near the monitor.
D. If batteries are used, please dispose of all batteries as per local regulations.
E. Use the monitor in indoor environments as per the temperature and
humidity specs.
8. The monitor should be operated from a power source indicated on the rear
of the monitor.
9. The 3-prong, grounded plug used on this monitor is a safety feature. Do not
power the monitor without a grounded plug.
10. Do not place the monitor where people will walk on the cord or allow anything
to rest on or rub against the power cord.
11. If an extension cord is used to power the monitor, make sure that the total
ampere usage of all the products plugged into the extension cord does not
exceed the ampere rating of the extension cord nor the power rating of the
outlet.
12. To avoid the risk of fire or an electric shock resulting from contact with
dangerous voltage points or damage to parts, never insert objects of any
kind into the monitor cabinet slots. Never spill any kind of liquid on the monitor.
13. Do not attempt to service this monitor yourself, as opening or removing the
cover may expose you to dangerous voltage points or other risks.
14. If any of the following occur, disconnect the power to the monitor and refer
servicing to qualified service personnel:
A. The power cord or plug is damaged or frayed.
B. Liquid has been spilled into the monitor.
C. The monitor has been exposed to rain, water or other liquids.
D. The monitor does not operate as expected as per the operating
instructions. Adjust only those controls as described in the operating
instructions; improper adjustment of other controls may cause the monitor to
become inoperative and may void the warranty.
E. The monitor has been dropped or the cabinet has been damaged.
F. The monitor exhibits a distinct change in performance, indicating a need
for service.
The power supply cord is used as the main disconnect device. Ensure that the
power outlet is located/installed near the monitor and is easily accessible.
2
To Next Page
Loading...