8
by searching for “Road Cover Eye1Pro” app and
then downloading it.
In the app, you can control most of the
functions and settings of your dash cam from
your phone, and control recording, photo-
taking, and file management.
Pairing Your Phone To The Dash Cam
• Turn On Wifi: Make sure the wifi on the
dash cam has been turned on. This can
be done in the settings menu or by
pressing and holding the SOS/Wifi button.
• You will see an SSID number starting with
CDC632 displayed on the dash cam's
screen. Open your phones wifi settings
and select the wifi source that matches
this SSID number.
• You may be prompted for a password. If
so, enter "12345678".
• After the password is entered open the
app.
Android users can download the
app from the Google play store
Note: After pairing the dash cam to your phone
using the app, some of the buttons on the dash
cam will not remain operational. As such, most
controls must be maid on your phone via the
app.
To Next Page
Loading...
