Need help?Do you have a question about the Car-Systems DPM-816 and is the answer not in the manual?
General| Device Specification | ns (updated in March 2018) |
|---|---|
| Measurement range | 0-99 mil / 0-3000 μm / 0-3 mm |
| Maximum measurable thickness | 99.9 mil / 3500 μm / 3.5 mm |
| Measurement units | Micrometre / Millimetre / Mil |
| Time for 1 measurement | 1 sec |
| Device useful lifespan | 7 years from manufacturing date |
| Resolution | 0.1 mil / 1 μm / 0.01 mm |
| Display size | 0, 78 x 1, 3 in (20 x 33 mm) |
| Measurement deviation (0 - 700 μm) | ± 1% + 0.04 mil (1 μm) |
| Measurement deviation (700 - 3000 μm) | ± 1% + 0.4 mil (10 μm) |
| Power element lifespan (AAA 1.2А/h measurement) | up to 75 hours (without backlight) |
| Operating temperature | -13 to 104ºF (-25 to 40ºС) humidity less than 70% |
| Body material | ABS+PC |
| Button material | Silicone |
| Power element | type AAA, 1.5V |
| Standby power consumption | 60 μA |
| Measurement power consumption | 16 mА/40 mА with backlight |
| Power element lifespan in standby | up to 2 years |
Weight and Dimensions| Weight (without power element) | 1.76 oz ( 50 g ) |
|---|---|
| Size | 4, 1 x 1, 7 x 1, 2 in (104х43х29 mm) |
Explains the device's function: measuring non-metallic coating thickness on metallic bases.
Provides guidance on how to clean the device using dry, soft cloth and avoiding detergents.
Details proper storage conditions: warm, dry, away from sunlight, magnetic fields, and corrosive chemicals.
Notes potential image refresh lag on the FSTN display at extreme temperatures.
Advises against removing or distorting the probe to prevent faulty operation.
Details the functions of the MODE, PWR, and UNIT buttons for device operation and calibration.
Illustrates the device's internal layout and guides on installing the AAA battery.
Explains how the battery icon indicates the remaining power and advises against using a drained battery.
Provides instructions on safe disposal of the battery due to its corrosive chemicals.
Step-by-step guide on powering the device on and off, including auto-off features.
Explains how to toggle the device's backlight feature using the PWR button.
Describes the three operating modes (A, M, P) and how to switch between them.
Explains how to select display units (mm, mil, µm) using the UNIT button.
Explains how to calibrate the device's zero reading on uncoated metal bases.
Describes how to reset zero and 2-point calibrations to factory default values.
Step-by-step guide for performing a two-point calibration using base metal and a coated plate.
Details the procedure for 6-point calibration, required for metals different from standard bases.
Instructions on how to enter calibration mode for ferrous or non-ferrous metals.
To Next Page