Introduction
Dear owner of thickness meter, thank you for purchasing the
device designed and developed in Russian Federation.
We are confident that you will find it useful in and it will serve you
for many years.
We kindly ask you to go through this user manual to make get the
most out of your device.
The device has the following features:
- Precise measurements
- Wide operating temperature range
- Large FSTN display with backlight
- Pressure stabilization of the probe
- Automatic metal type detection
- Powered by 1.5V AAA battery
- Small and ergonomic body
- Automatic power and backlight off switch
Purpose
The device is used to measure thickness of various non-metallic
coatings (paint, primer etc) over metallic base (steel, iron, alloys,
copper, aluminum etc).
An example of case for use would be to measure paint layer
thickness of car body panels.
To Next Page
Loading...