1
Contents
1.0 General 2.5 Safety Information
1.1 Specifications 2.6 Electrical Installation
1.2 User Responsibility/Warranty 3.0 Accessories
1.3 Final Assembly and Installation 3.1 Mitre Fence
2.0 Settings 4.0 Electrical Wiring Diagrams
2.1 Changing and Setting the Sawblade 5.0 Spare Parts List/Exploded View Drawing
2.2 Blade Guiding
2.3 Setting the Cutting Height
2.4 Saw Table Tilt
1.0General
1.1 Specifications
Dimensions (lxwxh) 800x330x420 mm
Weight with motor 33 kg
Table height from floor 368 mm
Throat width 245 mm
Max. cutting height
120 mm
Sawblade width 6-13 mm
Sawblade length 1790 mm
Sawtable size 290x290 mm
Sawtable tilt 0° - 45°
Sawblade speeds 700 m/min
Motor capacity 350 W
1.2 User Responsibility/Warranty
This appliance will perform in conformity with the description contained in the instructions provided.
This machine must be checked periodically. Defective equipment (including power cables) should not
be used. Parts that are broken, missing, obviously worn, distorted or contaminated, should be
replaced immediately. Should such repair or replacement become necessary, it is recommended that
only genuine replacement parts ate used and that such repairs ate carried out by qualified persons.
This appliance or any of its parts should not be altered or changed from standard specifications. The
user of this machine shall have the sole responsibility for any malfunction which results from improper
use or unauthorized modification from standard specifications, faulty maintenance, damage or
improper repair by anyone other than qualified person.
To Next Page
Loading...