To Next PageTo Next Page
Need help?Do you have a question about the Carbolite 200 and is the answer not in the manual?
The model 200 controller is a simple on/off controller made especially for Carbolite by Eurotherm.
The 200 is optionally available as a dual unit containing the main controller and an overtemperature controller.
Most Carbolite products are fitted with an “Instrument Switch” which cuts off power to the controller and other parts of the control circuit.
When switched on, the controller lights up, goes through a short test routine, and then displays the measured temperature and starts to control.
With the display at “home”, showing the measured temperature, press Down or Up once to display the setpoint.
If an audible alarm is supplied for use with the overtemperature condition, then it is normally configured to sound on overtemperature.
Diagram showing the navigation flow for the main controller functions and parameters.
Diagram showing the navigation flow for the overtemperature controller functions.
General| Brand | Carbolite |
|---|---|
| Model | 200 |
| Category | Temperature Controller |
| Language | English |
