To Next PageTo Next Page
Need help?Do you have a question about the Carbolite 201 and is the answer not in the manual?
Highlights ease of use, ramp-to-setpoint, and alarm output functionality.
Details the optional overtemperature controller's features like easy setting and latching alarms.
Explains power requirements and Instrument switch for controller operation.
Describes Page, Scroll, Down, and Up keys for operation and navigation.
Procedure for changing the target temperature using the Down and Up keys.
Method to stop and start the controller without altering the setpoint.
Guidance on setting a ramp rate to limit heating or cooling speed.
How to identify if the overtemperature option is fitted on the controller panel.
Describes alarm light changes and reset procedure for overtemperature conditions.
Explains the power limit parameter OP.Hi and its use for compensation or control.
Step-by-step guide to changing the OP.Hi parameter, including cautions.
Guidance on reducing power limit for improved stability at low temperatures.
Steps to access user calibration settings, including password entry and parameter selection.
Details on entering low/high temperature points and their corresponding offsets.
General| Resolution | 1°C |
|---|---|
| Control Type | PID |
| Display Resolution | 1°C |
| Temperature Range | Up to 1200°C |
| Sensor Type | K-type thermocouple |
| Cooling Rate | Dependent on furnace model |
| Power Supply | 50/60Hz |
